close
close

How To Measure Flange Size Elvie

How To Measure Flange Size Elvie. Legendairy 24 mm in a 28 mm elvie flange with any 15 mm available insert. Finger size changes depending on the time of the day and the weather.

Elvie Pump Breast Shield, 2Pack from fsastore.com

Finding a replacement flange is not as a straightforward process as one would expect. If it is 20mm or less, you should get a 24mm flange. 4 holes on flange multiply by 1.414.

Make Sure That The Chosen Size Leaves Enough Room For The Ring To.

For best results measure your finger size at the end of the day. You want to ensure you measure for a snug fit which leaves out swollen areola that often is mistaken for nipple. Most lactation consultants recommend using the comfy test to help determine the right flange size.

You Will Push Them In Until They Reach, But Don’t.

When it comes to pumping breastmilk, size matters! 28mm 30mm 16mm 18mm 20mm 22mm 24mm 26mm 36mm. 12 holes on flange multiply by 3.864.

Legendairy Silicon Flanges Inside The 28Mm Or 24Mm Elvie Flanges.

Assuming you can get to the bolts measure the centres of two adjacent bolts then use the following multipliers: Elvies come with 24mm and 28mm breast shields. This is represented by the blue dashed circle in the drawing.

Remember That It’s Important To Measure After You’ve Pumped Because Younipple Expands With Pumping.

Legendairy 24 mm in a 28 mm elvie flange with any 15 mm available insert. If you measure smaller than 17mm or you would like improvement in comfort, latch or milk volume, try our sizing inserts. I used it once and the output i got from it was horrible:

Watch How To Properly Use The Fitting Guide And Why Finding The Right Fit Is Key For Each Pumping Session.

The standard flange size is often 24mm, but you may need to select smaller or larger flanges based on your measurement. Measure the diameter of the nipple at the base of the nipple. If it is 26mm or less, go with the 30mm flange.

Leave a Comment